Numero uno
Using fusion 360, I had to create replicas of the blocks from the sample package.
-I measured the blocks, created the image, and made an STL file.
Step 2
3D printing!
I chose 3 pieces.
(I chose the 3 out of the 6 that were more of the complicated designs)
Step 3
The results with three blocks+the original wood pieces
Step 4
Razor Cutting plan using Inkscape
Step 5
RAZOR CUTTING TIME
Step 6
Gluing pieces together.
Step 7
Sandpaper time
-took about an hour
Step 8
Finally, putting the pieces together!
Feedback
-I though I made an error in fusion 360 and made one of my pieces the wrong way.
-I created an extra 3D printing piece that was not necessary.
- I also bought blocks from the D2 store and wasn't able to use them because they wood was too hard to cut.
-Therefore, I made smaller pieces.