place Z_axis_stepper_motor w/Base plate

First, I placed Z_axis_stepper_motor with Base plate.
Design tool is Fusion360.
Materials as following...
Stepper motors Nema16 39HS2004A4   Flexible shaft coupler 5mmx8mm Lead screw w/Steel nut 150mm
 acrylic Base plate cut by laser cutter 5mm

attach Aluminum flame w/ Z_axis_liner_shaft

Then I attached Aluminum flame with Z_axis_liner_shaft.
Materials as following...
SF-20・20 50mm・188mm・181mm
D Bracket SS w/screw-tap SFJ-017 Liner shaft φ5mm 188mm 3D printed fixing blocks

attach X_axis_stepper_motor_assy

Next, I attached X_axis_stepper_motor_assy.
Materials as following... 

Stepper Motor NEMA11  
GT2 Timing Pully
GT2 Timing Belt   
Liner Shaft φ5mm 169mm
3D printed Fixing blocks
Liner ball bearing LM5UU

attach Extruder_unit_assy

Then I attached Extruder_unit_assy.

Materials as following... 
3D printed Timing Belt holder unit
3D printed Bearing holder block module
acrylic plate
extruder unit
liner rail shaft clamp SK16(for fixing extruder)

attach Y_axis_stepper_motor_assy

Then I attached Y_axis_stepper_motor_assy.

Materials as following... 

Stepper motor Nema16 39HS2004A4
GT2 Timing Pully
GT2 Timing Belt   
Liner Shaft φ5mm 145mm
3D printed Fixing blocks

attach Heated_bed_assy

Next I attached Heated_bed_assy.

Materials as following... 

3D printed Y_axis_timingbelt_holder
3D printed Fixing blocks
Liner ball bearing LM5UU
Aluminum Y_axis_base_plate 100x100mm
grass platform 100x100mm
Waterploof silicon Heater pad 100x80mm

attach XYZ_axis_endstops

Finaly, I attached XYZ_axis_endstops.