Chameleon Lamp

Created Date: 2015-05-28/ updated date: 2015-05-28
    Owner & Collaborators
    License
    Chameleon Lamp by thanhmeye, papcodientu is licensed under the Creative Commons - Attribution license.
    Summary
    In this workshop, Fablab Saigon will show you how to make a lamp that changes colours upon detecting a hand swipe. You will learn to program the lamp's LEDs to shine your favourite colours. To switch off the lamp on or off, keep your hand just above the sensors for a few seconds. We will show you how to program a microcontroller to sense your hand movement and to build a lamp shade from scrapbooking paper. A demo can be seen at: https://youtu.be/w0-yVBAa4qA

    Memo

    How to make the control circuit

    posted by thanhmeye on May 28, 2015
    There are 2 circuit boards to make: MCU and Sensor. Their designs are available at Github https://github.com/papcodientu/Chameleon-Lamp 1. Make your board using any method you are familiar with, either by etching or milling. 


    2. Solder components to the boards. 3. Connect Sensor board and LED strip to MCU board, as shown in below screenshot.

    Comments