#3D Solid Six Wooden Creation

Created Date: 2017-06-05/ updated date: 2017-06-05
    Owner & Collaborators
    License
    Summary

    Materials

      Tools

        Blueprints

          Making

          • Using fusion 360, I had to create replicas of the blocks from the sample package.

            -I measured the blocks, created the image, and made an STL file.

            • 3D printing! 
              I chose 3 pieces.
              (I chose the 3 out of the 6 that were more of the  complicated designs) 
              • The results with  three blocks+the original wood pieces
              • Razor Cutting plan using Inkscape
              • RAZOR CUTTING TIME
              • Gluing pieces together. 
              • Sandpaper time 
                -took about an hour
              • Finally, putting the pieces together!
            • -I though I made an error in fusion 360 and made one of my pieces the wrong way. 
              -I created an extra 3D printing piece that was not necessary. 
              - I also bought blocks from the D2 store and wasn't able to use them because they wood was too hard to cut. 
              -Therefore, I made smaller pieces.
              Add Card Order

              References

                Usages

                • Materials used

                  -Razor Cutter
                  -SFC's (4mm) Wood
                  -3D printing materials
                  -Sandpaper 
                  -Inkscape & Fusion 360

                Project comments